Using the Flex-Bay

Your computer includes the Flex-Bay, a peripheral bay that can hold one of the following devices:

•CD-ROM drive: shippped with some computers and also available as an option.

•DVD-ROM: shippped with some computers and also available as an option.

•Optional secondary hard drive: available as an option for your computer.

•Superdisk LS-120: available as an option for your computer.

If your operating system is Windows 98/ Me, you can use the SwapBay Utility to hot-swap the devices. If you do not use Windows 98/ Me, make sure that the computer’s power is off before you remove or install any devices.

To remove a device from the Flex-Bay

1.Turn the computer’s power off.

2.Close the LCD panel, and turn the computer over so that the bottom of the unit faces up.

3.Pull up on the Flex-Bay latch and pull the device from the bay.(Figure 13)

Flex-Bay latch

Figure 13. Removing a Device from the Flex-Bay

4. Remove the device out of the bay.

Using the Flex-Bay 23