2.Double-click the Telephony icon.

3.Go to the My Locations tab of Dialing Properties dialog. Select the country at the I am in this country/region list box.

Confirming Installation of the Modem Driver

After the modem driver is installed, check if the modem driver is installed properly.

1.Click the Start button, point to Settings and then click Control Panel.

2.Double-Click Modems icon.

3.Select SENS LT56IDW Modem in the Diagnostics tab and then click the More Info... button.

4.The modem is properly installed if the contents of Command and Response appear in the More Info... window.

Installing the Modem Driver in Windows 98 (Modem/LAN Module Driver)

You can install the modem driver as shown in the following.

The figures illustrated in this manual may not be identical to those on your system. The figures in this manual were developed using the SENS LT56IDW Modem Installation as reference.

Install the Modem Driver

Before you install the modem drivers, check if the Serial Controller under Other devices of Device Manager tab of Control Panel on Windows exists. If it exists, remove it first.

After that, install the modem driver according to the instructions below.

You can also install the modem driver by specifying the location of the directory that the modem driver is in when Windows 98 automatically detects the modem and shows the Add New Hardware Wizard dialog. But, it is easier to press

50 Using the Modem