| times as specified in n value. If the value of n is '0', ATA command |
| should be entered for auto answer |
ATS0? | Displays S0 register value on the terminal |
ATX3 | Dials after waiting for specified time |
ATX4 | Dials after dial tone is detected |
ATZ | Initializes modem |
AT&F | Loads the factory default configuration (profile) |
AT&V | Shows current configuration |
AT&W | Saves user profile |
AT&Zn=xStores the dial string in modem memory (n=0~3, x=phone number) e.g.) AT&Z0=1235678
Automatically calls the stored phone number by using the following command.
ATDTS0 | Recalls the stored phone number as AT&Z0 by tone |
| dial |
ATDPS0 | Recalls the stored phone number as AT&Z0 by pulse |
| dial |
AT+MS=X Sets protocol for modem connection (X=V90, V34)
AT+MS=V90 (default setting)
Try to connect with V.90 (max 56 Kbps)
AT+MS=V34
Try to connect with V.34 (max 33.6 Kbps)
58 Using the Modem