Samsung Using the Multi-Baysin the Docking Station, Changing Devices, Changing a 5.25” Device

Using the Multi-Bays in the Docking Station

Your computer includes the docking station that holds a 5.25" and a 3.5" device in the two multi-bays. Below is a listing of the device types you may install in your docking station.

The default system is purchased with CD-ROM and FDD devices.

5.25” Devices:	CD-ROM drive	DVD-ROM drive	CD/DVD-Combo
	CD-RW/DVD Combo	2nd HDD
3.50” Devices:	FDD

Changing Devices

This section will discuss changing the 5.25" and 3.5" devices.

Changing a 5.25” Device

To change from one 5.25” device to another simply follow the steps below:

5.25" Device

1.Turn off the system.

2.Detach the system from the docking station.

3.Slide the 5.25” multi-bay latch toward the middle of the multi-bay.

4.The device will pop out approximately 2cm.

5.Remove the device.

6.Insert the new 5.25” device into the multi-bay until the multi-bay latch clicks.

34 Users Manual