1. Manuals
  2. Brands
  3. Computer Equipment
  4. Laptop
  5. Samsung
  6. Computer Equipment
  7. Laptop

Samsung Press the button on the, 3.Push the tray in gently to close the drive tray

NQ10TK2X01/SEG, NQ10TK2X01/SUK, NQ10TP2U01/SEG, NQ10TP2X01/SEG, NQ10TP2X17/SEG

1 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 96
Download on canonical page 96 pages, 7.93 Mb

1.Press the button on the CD-ROM or DVD-ROM drive, and the tray slides out. (Do not lean on the tray; because it will not support much weight.)

CD/DVD Drive Warnings:

Do not place reflective objects other than the CD/DVD disks in the disk slot because of possible hazardous laser emissions. The laser beam used in this CD/DVD-ROM drive is harmful to the eyes. Do not attempt to disassemble the CD/DVD-ROM drive. Refer servicing to your authorized service center.

Do not touch the CD/DVD lens, doing so may damage the device.

CD/DVD Precautions:

The tray may be stuck, in which case straighten out a paper clip, insert it into the Emergency Eject hole in the front of the CD/DVD-ROM and push it until the tray ejects.

A LED on the drive tray is on when the computer is reading from a CD. Do not remove a disc when this LED is on.

To clean a CD/DVD, wipe from the center outwards with clean and dry cloth. Remove the CD/DVD when the drive activity LED is off.

2.Insert a CD/DVD, label side up (or remove a disc, if you have finished using it).

3.Push the tray in gently to close the drive tray.

Eject Button

CD/DVD-ROM LED

Emergency Eject Hole

Install and/or start a CD-based program as you would run a program on a floppy disk. See your operating system documentation for more information on running programs.

Using the Disk Drives 37

MENU

Models

Contents