Samsung P50F PH50KLFLBC/EN, PH63KLFLBC/EN, PH63KLFLBC/ZA, PH63KLZLBC/EN manual 29

Introduction

•Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation.

3.Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product.

4.Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket.

A -	PDP Display
B -	Wall Bracket
C -	Wall

Wall Bracket Angle Adjustment

Adjust the bracket angle to -2° before installing it on the wall.

1.Fix the product to the wall bracket.

2.Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle.