Samsung SCC-C4207P, SCC-C4307P SET-UPbutton, Broadcast System, Power System/Power Consumption

1 Overview

This is a state-of-art WDR zoom camera which employed the x32 zoom lens and digital zoom IC to monitor up to 320 times as large as an original image.

SCC-C4207(P)/C4307(P) has the following functions.

●	WDR for distinct photographing of both bright and dark
	parts of an image.
●	DAY/NIGHT to raise the sensitivity by automatic
	conversion into the White & Black mode at night or in poor
	illumination environment.
●	Low - Light Surveillance function that enables image
	capture even under extremely low light conditions.
●	White Balance function that provides accurate color

2 Part Names and Functions

E

SET-UP button

	rendition under any light conditions.
●	BLC function that enables effective back light
	compensation even under a spotlight or a very bright
	incident light.
●	Auto Focus function that automatically tracks and focuses
	on the moving subject.
●	Privacy Zone function to hide a special area for privacy
	protection.
●

REMOTE RS-485 PWR IN

SET-UP button

Instead of “POWER”, “DC IN” is writtern in SCC-C4207(P). Instead of “POWER”, “PWR IN” and instead of “GND”, “DC12&AC24V” is writtern in SCC-C4307(P).

RS485/ Wired remote control function.

Broadcast System

●SCC-C4207/4307 : NTSC System

●SCC-C4207P/4307P : PAL System

Power System/Power Consumption

●SCC-C4207(P): DC 12V/5.5W

●SCC-C4307(P): AC 24V, DC 12V/6W

7

The function of the SET-UP button varies depending on whether you are currently in Normal Operation mode (i.e., the Setup Menu is not displayed) or Setup Menu mode.

✔In Normal Operation Mode

-UP/ DOWN buttons : Use as the ZOOM Tele button and the ZOOM Wide button respectively.

- LEFT/ RIGHT buttons : Use as the FOCUS Near button and the FOCUS Far button respectively.

- SET- UP button: Use to enter the Setup Menu.

Hold the SET- UP button for longer than 3 seconds to enter the Setup Menu.

Press the [SET UP] switch shortly (within 1 sec.) to 8 start the AF function.