Installation
DIP SWITCH SETUP | • Select the appropriate Protocol with DIP switch |
| combination. |
|
Before you install the camera, you should set the DIP switches to confi gure the camera ID, Baud rate, and communication protocol.
Protocol | Buad Rate |
Auto Select |
|
Terminate
ID Setting (1~255)
| Switch State |
| Protocol | ||
Pin1 | Pin2 | Pin3 | Pin4 | ||
| |||||
OFF | OFF | OFF | OFF | Auto Protocol | |
ON | OFF | OFF | OFF | ||
OFF | ON | OFF | OFF | ||
ON | ON | OFF | OFF | Samsung |
•If you set the protocol as Auto Protocol, camera will automatically recognize the kind of Protocol.
•Auto Protocol supports
•If you want to control using DVR or system keyboard, their protocol must be identical to camera. Otherwise, you can not control the camera.
•If you changed camera protocol by changing DIP S/W, the change will be effective after you reboot the camera.
ENG
ON
ON
1 2 3 4 5 6 7 8
Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
ID Value | 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 |
|
|
|
|
|
|
|
|
|
ex) ID=5 | on | off | on | off | off | off | off | off |
ex) ID=10 | off | on | off | on | off | off | off | off |
|
|
|
|
|
|
|
|
|
•If you want to control a certain camera, you must match the camera ID with Cam ID setting of DVR or Controller.
| Switch State |
| Protocol | |
Pin5 | Pin6 |
| Pin7 | |
|
| |||
OFF | OFF |
| OFF | 2400 BPS |
ON | OFF |
| OFF | 4800 BPS |
OFF | ON |
| OFF | 9600 BPS |
|
|
|
|
|
ON | ON |
| OFF | 19200 BPS |
|
|
|
|
|
OFF | OFF |
| ON | 38400 BPS |
|
|
|
|
|
ON ON
1 2 3 4 5 6 7 8
English – 13