How to use OSD Menu
CAMERA SETUP
ZOOM CAMERA SETUP
FOCUS MODE | SEMIAUTO |
DIGITAL ZOOM | ON |
IMAGE FLIP | OFF |
<WHITE BALANCE SETUP> <AUTO EXPOSURE SETUP>
BACK
EXIT
Setup the general functions of zoom camera module.
•FOCUS MODE [AUTO/MANUAL/SEMIAUTO] Sets camera focus mode.
–SEMIAUTO ModeThis mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode. Manual Focus mode activates in preset operation and Auto Focus mode activates when jog operation starts.
With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset.
• DIGITAL ZOOM [ON/OFF]Sets digital zoom function to ON/OFF. If this is set to OFF, optical zoom function runs but zoom function stops at the end of optical zoom magnifi cation.
• IMAGE FLIP | [ON/OFF] |
WB SETUP |
| |
WB MODE | AUTO | |
- | RED ADJUST | |
- | BLUE ADJUST |
BACK
EXIT
• WB MODE | [AUTO/MANUAL] |
• | RED ADJUST | [10~60] |
• | BLUE ADJUST | [10~60] |
AE SETUP |
|
BACKLIGHT | OFF |
DAY/NIGHT | AUTO1 |
BRIGHTNESS | 25 |
IRIS | AUTO |
SHUTTER | ESC |
AGC | NORMAL |
DNR | MIDDLE |
OFF |
BACK
EXIT
•BACKLIGHT [OFF/LOW/MIDDLE/HIGH] Sets Backlight Compensation
•DAY/NIGHT [AUTO1/AUTO2/DAY/NIGHT]AUTO1 exchanges Day/Night mode faster than AUTO2.•BRIGHTNESS [0~100]Adjusts brightness of images. Iris, Shutter Speed and Gain are adjusted automatically in correspondence with this value.
• IRIS | [AUTO/MANUAL(0~100)] |
If Iris is set to Auto, Iris should have highest priority in adjusting AE and Shutter Speed should be
fi xed.If Iris is set to Manual, Iris should be fi xed and Iris has lower priority in adjusting AE, in comparison with others.
•SHUTTER Speed[ESC/A. Flicker/Manual(×128~1/120000 sec)]If Iris is set to Manual and Shutter Speed is set to ESC, Shutter Speed should have highest priority. If Shutter Speed is set to A. Flicker, to remove Flicker, Shutter Speed should be set to 1/100 sec. for NTSC and 1/120 for PAL.
•AGC [OFF/NORMAL/HIGH]Enhances image brightness automatically in case that luminance level of image signal is too low.
•DNR [OFF/LOW/MIDDLE/HIGH]Enhances images by deducting noises when gain level of images is too high.ENG
English – 33