Samsung SCC-C7325 AUTO PAN SETUP, [1~8], • APAN SPEED, • CLEAR APAN, • APAN Number, •2ND POSITION, • 1ST POSITION, ❖ Edit Preset Label, Deletes current Auto Pan data

How to use OSD Menu

❖ Edit Preset Label		AUTO PAN SETUP
LABEL - PRESET 1		AUTO PAN SETUP
[█	]	APAN NO.	1
----------
		1ST POS.	NOT USED
1234567890	OK
		2ND POS.	NOT USED
ABCDEFGHIJ	CANCEL
KLMNOPQRST		APAN SPEED	30/SEC
UVWXYZabcd
		CLEAR APAN	CANCEL

efghijklmn
opqrstuvwx
yz<>-/:.	BACK
----------
	EXIT

①Edits label to show on monitor when camera arrives at presets. In Edit Label menu, a reverse rectangular is cursor. As soon as fi nishing selecting alphabet, cursor moves to the next digit.

[█]

Current Cursor Position

②Using Left/Right/Up/Down of joystick, move to an appropriate character from the Character set. To choose that character, press the NEAR or ENTER key.

----------

1234567890 ABCDEFGHIJ KLMNOPQRST UVWXYZabcd efghijklmn opqrstuvwx yz<>-/:.

----------

Space Char. Back Space Char.

If you want to use blank, choose Space character (“ ”). If you want to delete a character before, use back space character (“ ”).

③If you complete the Label editing, move cursor to “OK” and press NEAR or ENTER key to save completed label. To abort current change, move cursor to “Cancel” and press NEAR or ENTER key.

• APAN Number [1~8]

Selects Auto Pan number to edit. If a selected Auto Pan has not defi ned, “NOT USED” is displayed in 1st Position and 2nd Position

• 1ST POSITION [PRESET 1~128]

•2ND POSITION

Set up the 2 position for Auto Pan function. If a selected preset is not defi ned, “UNDEFINED” will be displayed as shown below.

AUTO PAN SETUP
APAN NO.	1
1ST POS.	PRESET5
2ND POS.	NOT USED
	UNDEFINED

When Auto Pan function runs, camera moves from the preset assigned as the 1st point to the preset assigned as the 2nd point in CW (Clockwise) direction. Then camera moves from the preset assigned as the 2nd point to the preset assigned as the 1st point in CCW (Counterclockwise) direction. In case that the preset assigned as the 1st point

is same as the preset assigned as the 2nd point, camera turns on its axis by 360° in CW direction and then it turns on its axis by 360° in CCW direction.

• APAN SPEED [1°/sec ~180°/sec]

Sets Auto Pan speed from 1°/sec to 180°/sec.

• CLEAR APAN [CANCEL/OK]

Deletes current Auto Pan data.

ENG

English – 29