Samsung SCC-C7325 INSTALLATION USING SURFACE, MOUNT ON THE CEILING, Installation, SCC-C6323, ❖SCC-C6323, ❖RS-485Termination Resistor, bracket or side of lower body

Installation

❖RS-485 Termination Resistor

③ Placing lower body to Surface Mount bracket.

The cable must be properly handled into hole of

bracket or side of lower body.

ON

ON

1 2 3 4 5 6 7 8

•Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it must be OFF state. Especially when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera.

– Pin 8 RS-485 Termination Resistor (On/Off)

INSTALLATION USING SURFACE

MOUNT ON THE CEILING

❖SCC-C6323

①Setup DIP Switch (see previous page).

￿

④ Make sure stopper pin of bracket pin is located the rightmost side of lower body groove as shown in the picture. Press the dome and turn clockwise till the pin is located leftmost side of groove. Detach protection vinyl from dome cover.

②Screw surface mount bracket to ceiling with 4 screws.

￿

￿

14 – 10X MINI SMART DOME CAMERA