| Operation | |
• Run Pattern | Tuesday at 9:00AM. If you choose Weekday, camera | |
Method 1) <Run Pattern> [Pattern NO.] | will move to Main gate everyday except weekend. | |
| ||
ex) Run Pattern 2 : <Run Pattern> [2] | It is noted that due to the real time clock, the time data | |
will be kept regardless of blackout. The initial time and | ||
Method 2) <Go Preset> [Pattern NO.+130] | ||
day setup is essential to proper Schedule function. | ||
ex) Run Pattern 2: <Go Preset> [132] | ||
| ||
• Delete Pattern | • Set Schedule | |
Use OSD menu to delete a Pattern. | ||
Use OSD Menu to create a Schedule | ||
When the pattern is saved or executed, the PAN/TILT | ||
• Run Schedule | ||
is operated with Auto Flip OFF mode. | ||
Use OSD Menu of Schedule Master Enable | ||
|
SCAN
•Function
The Scan function allows running sequence of Presets, Patterns and/or Auto Pans. Max 8 Scan can be stored. Each Scan can have max 20 action entities which can be preset, pattern or Auto Pan. Dwell time means the time interval between actions and is adjustable in the menu. Besides, there is an option number with which Preset speed as well as the repetition number of Pattern and Auto Pan can be set up.
| Dwell Time |
|
Preset 1 | Pattern 5 | Auto Pan 5 |
Max 20 entities
•Set ScanUse OSD Menu to create a Scan .•Run ScanMethod1) <Run Scan> [Scan No.] ex) Run Scan 2 : <Run Scan> [2]
Method2) <Run Preset> [Scan No.+150] ex) Run Scan 2 : <Run Preset> [152]
•Delete ScanUse OSD Menu to delete.SCHEDULE
•Function
The Schedule function allows running an appropriate function like Preset, Auto Pan, Pattern, Scan, Home move at designated day and time. For example, if you setup a rule Tuesday at 9:00AM and Preset 1 (say Main Gate), the camera will move to main gate every
Use OSD Menu to delete.
OTHER FUNCTIONS
•Preset LockThis function is made to protect preset data from unauthorized overwriting. If Preset Lock is ON, Preset save command using Hot Key is disabled while Preset save using OSD Menu is acceptable.
•Power Up ActionThis function enables to resume the last action executed before power down. Most of actions such as Preset, Pattern, Auto Pan and Scan are available for this function but Jog actions are not available to resume.
•Auto FlipIn case that tilt angle arrives at the top of tilt orbit (90°), zoom module camera keep moving to opposite tilt direction (180°) to keep tracing targets. As soon as zoom module camera passes through the top
of tilt direction (90°), images should be reversed automatically and F appears in screen. If this function is set to OFF, tilt movement range is 0 ~ 90°.
•Parking ActionThis function enables to locate the camera to specifi c position automatically if operator doesn’t operate the controller for a while. The Park Time can be defi ned as an interval from 1 minute to 4 hours.
•Alarm Input2 Alarm Inputs are used. If an external sensor is activated, camera can be set to move to corresponding preset position. It is noted that the latest alarm input is effective if multiple sensors are activated.
ENG
English – 23