Connecting the camera directly to a DHCP-based xDSL/Cable modem
This is enabled for a modem using DHCP.
Setting the IP Router
1 | Set the IP address referring to "Static IP Setting" on page 36 or "Dynamic IP Setting" on page 40. |
2 | Launch an Internet browser on the local PC connected to the IP Router. |
3 | Enter the IP Router’s address in the address bar of the browser. |
| ex) http://192.168.1.1 ,http://192.168.0.1 or http://192.168.xxx.1 |
| For the address of the IP router, refer to the product’s documentation. |
4 | When the IP Router is connected, the login window appears and prompts you to enter the password. |
| For the login IP and the password, refer to the IP router’s documentation. |
5 | When done, you will see the setup window of the IP router. In the setup menu, select “Automatic |
| |
| For the menu location of Internet Connection Type or DHCP selection, refer to the IP router’s |
| documentation. |
6 | When done, click the [Save] or [Apply] button to save the settings. |
xDSL or Cable Modem | ||
External Remote PC | ||
|
DDNS Server
(Data Center, KOREA)
32_ Network Connection & Setup