The manual network setting is finished.

You can’t change the port numbers of Device, TCP, UDP, Upload and Multicast,

 

which are automatically changed according to the increase/decrease of the port

 

number of HTTP.

4

4 In the <PORT>fields, set up port numbers.

<HTTP Port>: A HTTP port used to connect

 

 

 

 

 

to a camera using the Internet

 

 

 

 

 

browser. The default value is 80.

 

 

 

 

 

The HPPT port value can be

 

 

 

 

 

changed by using the up/down

 

 

 

 

 

 

 

 

 

 

button to the right.

 

 

 

 

 

The HTTP port number starts

 

 

 

 

 

5

 

6

with 80 and increases/decreases

 

 

 

 

 

 

to 10000, 10006, 10012…

 

 

 

 

 

<Device Port>: A port used to control video

 

 

 

 

 

transmission. The default value

 

 

 

 

 

is 60001(TCP).

 

 

 

 

 

<TCP Port>: A port used to transfer video using TCP protocol. The default value is 60002(TCP).

<UDP Port>: A port used to transfer video using UDP protocol. The default value is 60003(UDP).

<Upload Port>: A port used to upgrade software. The default value is 60004(TCP).

<Multicast Port>: Shows UDP port set for video transmission using UDP Multicast. The default value is 60005(UDP).

5 Enter your password.

The default password is “4321”.

The password is the camera login password of the root user. 6 Click the [OK] button.

7 The camera is set to the manually entered IP and is restarted.

IP STATIC SETTING 04

Setting Static IP _37