Precautions – Installation and Use

Do not disassemble your camera.

Always be cautious when handling your camera.

Do not subject the camera to impact or vibration and always be cautious of damaging the camera due to neglectful storage and/or operation.

Do not install the camera at a location where it would become exposed to rain or humidity and do not operate the camera in a wet environment.

Do not clean the camera’s main body using harsh abrasives or similar substances. If dirty, use a dry piece of cloth to clean instead.

Install the camera in a shaded area or environment, protected from direct sunlight. Direct sunlight exposure has a negative effect on the camera.

Do not bend or throw the SDHC memory card.

Do not store or use the SDHC memory card in a hot, humid, or dusty environment.

Protect the contacts of the SDHC memory card from foreign substance buildup.

If foreign substances have been built up on the contacts, remove using a soft piece of cloth.

When removing the SDHC memory card, disable SD Card Recording to protect against data loss (refer to page 70 for instruction on disabling SD Card Recording).

Data cannot be stored on SDHC memory cards whose service life has expired. Please purchase a new SDHC memory card if you experience this.

The manufacturer will not be held responsible for data loss incurred by the customer due to improper use.

Using non-recommended PoE device may cause malfunction of either the camera or PoE device itself. (Refer to page 5 for the compatible PoE Switch)

Recommended PC Specifications

CPU: Pentium4/2.4GHz or higher

Operating System: Windows XP(Service Pack2) / Windows Vista

Resolution: 1024X768 pixels or higher

RAM: 512MB or higher

Web Browser: Internet Explorer 6.0 or higher

Video Card: Radeon, Nvidia

Video Memory: 128MB

DirectX 8.1 or higher

Compatible IP Routers

Linksys

D-Link

Netgear

04_ Preparation