You can set an image to be sent through FTP/Email(SMTP) or saved on the SDHC memory card when an alarm is generated or during the scheduled transfer.
1 Click <EVENT> <ALARM IMAGE>. The ALARM IMAGE SETUP window appears.
2 To complete the setting, click the [Apply] button.
The settings are saved.
1.<Transfer Mode>: You can select a method to send an alarm image from the <FTP>,
-<FTP Transfer>: The image is sent to the specified FTP address.
-
-SD Card Recording
Insert an SDHC memory card.
Configure the SDHC memory card (refer to page 69 for details).
Check the SD Card Recording option and then click on the [Apply] button. The SD indicator will then turn on and recording will commence.
To remove the SDHC memory card, first uncheck the SD Card Recording option and then click on the [Apply] button.
2.<Transferred Image Naming Setup>: You can set the file name of an alarm image to be sent when an alarm is generated or during the scheduled transfer.
3.<Pre/Post Alarm Image>: You can determine which of previous or posterior image is to be sent.
-<Number of Image>: Determines number of images to be sent per second. You can select 1, 2, 3 and 5 images per second.
-
-
70_ Setting Up