operating the cleaner
Charging
When the product is initially purchased, the battery is fully |
| |
discharged, and you must charge the vacuum cleaning | Power lamp | |
robot manually. | ||
Charging lamp |
Turn on the Power Switch at the bottom of the product.
1.After aligning the charge pins of the main unit with the
charge pin of the charger station, press the main unit | Power lamp |
until you hear a Recharging power sound from the | Charging lamp |
| |
charger. |
|
- The Charging Lamp turns green. |
|
2.Check the charge status of the vacuum cleaning
robot.
-When it is fully charged, all three bars of the battery level icon will Flash simultaneously.
■If the following appears in the display (as seen in the fi gure below) 10 seconds after connecting the robot cleaner to the charging station, it indicates that the power switch is turned off. In this case, please turn on the power switch at the bottom of the cleaner.
FlashFlash
Flash ■ When the battery level display fl ashes while
vacuuming and automatically charges itself at the charger.
■If the battery level icon on the display moves to
the right as shown while the cleaner is operating, the cleaner can no longer be operated by either the remote control or the buttons on the main unit. In this case, use the charger station to recharge the battery. (This is when the battery is completely discharged.)
<Charge display>
Charge Charging Required
completecharging
22_ operating the cleaner