Samsung SR8730 Recharging, _25, ❈ Option, CLEANER THE OPERATING, operating the cleaner _25, will return to the charger, -When the battery is fully discharged

Recharging

You can have the Vacuum cleaning Robot return to the charger to charge the battery by using the Recharging button.

■ When the Vacuum cleaning Robot is operating, press the () button to cancel the operation and press the Recharging button.

❈ Option

1.Press the Recharging button.

-The main unit icon () is turned on and the Vacuum cleaning Robot

will return to the charger.

2. To stop the Vacuum cleaning Robot while it is returning to the charger, press the () button.

3. To test the auto charge function, press the Recharging button when the Vacuum cleaning Robot is less than 1.5 m from the charger.

CLEANER THE OPERATING 03

Troubleshooting when the Vacuum cleaning Robot does not return to the charger

■Check the installation of the charger

-When the charger is in a location where the charger cannot guide the Vacuum cleaning Robot to the charger.

-When the charger is more than 5m away from Vacuum cleaning Robot.

:It may require a longer time for the Vacuum cleaning Robot to return to the charger.

■Manually charge the Vacuum cleaning Robot in the following cases.

-When the charger is installed in a corner.

-When the battery is fully discharged.

-When the Vacuum cleaning Robot is trapped by an obstacle (furniture etc.)

-When the Vacuum cleaning Robot cannot pass over the doorsill to the location where the charger is installed.

Using the remote

control

Flash

Using the main unit

buttons

operating the cleaner _25