Humminbird 595C manual

Contents

Main How Sonar Works 1 How GPS and Cartography Work 2 Whats On the Sonar Display 4 Views 6 Viewing Cartography 15 Introduction to Navigation 16 Thank You! Powering Up the Unit 26 The Menu System 26 Start-Up Options Menu 28 Sonar X-Press Menu (Sonar Views Only) 31 Navigation X-Press Menu (Navigation Views Only) 36 Sonar Menu Tab 40 Navigation Menu Tab 46 Table of Contents How Sonar Works Single Beam Sonar How GPS and Cartography Work Multi-Media Card (MMC) Whats On the Sonar Display Views Sonar View Bottom Presentation Understanding Sonar History Real Time Sonar (RTS) Window Big Digits View Sonar Zoom View Birds Eye View Chart View Viewing Cartography Combo View View Orientation Save, Edit, or Delete a Waypoint Introduction to Navigation Waypoints, Routes and Tracks Add a Waypoint Target or Trolling Grid Navigate to a Waypoint or Position Save, Edit or Delete a Route Save or Clear a Current Track VIEW Key INFO Key MENU Key Edit, Delete or Hide Saved Tracks Key Functions EXIT Key 4-WAY Cursor Control Key MARK Key GOTO Key ZOOM (+/-) Key Powering Up the Unit The Menu System System Status Start-Up Options Menu Normal Operation Simulator Sonar X-Press Menu (Sonar Views Only) Upper Range (Advanced: Sonar, Split Sonar and Big Digits Views Only) Sensitivity Bottom View Lower Range M Chart Speed Save Current Track Clear Current Track Save Current Route Navigation X-Press Menu (Navigation Views Only) Remove Grid (Only if a Grid is Active) Sonar Window (Combo View Only) Skip Next Waypoint Fish ID+ Sonar Menu Tab Depth Lines Fish Sensitivity Real Time Sonar (RTS) Window Max Depth Water Type Surface Clutter Noise Filter Tracks Waypoints Navigation Menu Tab Chart Detail Level Map Borders Routes View Orientation Grid Rotation Trackpoint Interval Track Min Distance Lat/Lon Grid Spot Soundings Clear Map Offset Delete All Nav Data Map Datum Set Simulation Position Set Map Offset Depth Alarm Fish ID Alarm Low Battery Alarm Alarms Menu Tab Arrival Alarm Drift Alarm Temp Alarm Off Course Alarm Setup Menu Tab Alarm Tone Units - Speed User Mode Language (International Only) Units - Depth Select Readouts (Advanced, Sonar View Only) Triplog Reset Restore Defaults Local Time Zone Daylight Savings Time (Advanced) Position Format (Advanced) NMEA Output (Advanced) Sonar Time Format (Advanced, International Only) Troubleshooting FishFinder Doesnt Power Up FishFinder Defaults to Simulator with a Transducer Attached Views Menu Tab Finding the Cause of Noise Possible Source of Noise Isolation Display Problems Problem Possible Cause Specifications Humminbird FishFinder Accessories Contact Humminbird