
Lat/Lon Grid
Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines.
To change the Lat/Lon Grid setting:
1.Highlight Lat/Lon Grid on the Navigation main menu.
2.Use the LEFT or RIGHT
Spot Soundings
Spot Soundings allows you to display or hide spot soundings, which are depth measurements shown on the chart.
NOTE: Spot Soundings are only available on
To change the Spot Soundings setting:
1.Highlight Spot Soundings on the Navigation main menu.
2.Use the LEFT or RIGHT
Shaded Depth
Shaded Depth allows you to change the depth used for shading on the chart views.
To change the Shaded Depth setting:
1.Highlight Shaded Depth on the Navigation main menu.
2.Use the LEFT or RIGHT
North Reference
North Reference allows you to have bearings displayed with one of two orientations: True North or Magnetic North.
To change the North Reference setting:
1.Highlight North Reference on the Navigation main menu.
2.Use the LEFT or RIGHT
Grid Rotation
Grid Rotation allows you to set the orientation of the trolling grid in degrees, where a setting of 0° displays a standard North, South, East, West alignment. See Waypoints for information on how to set a Grid.
To change the Grid Rotation setting:
1.Highlight Grid Rotation on the Navigation main menu.
2.Use the LEFT or RIGHT
Trackpoint Interval
Trackpoint Interval allows you to select the time period between trackpoints. The current track can only contain up to 2000 trackpoints, so longer time periods cause the track to extend back further in time, but will be less detailed.
NOTE: Trackpoint Interval works in conjunction with Track Min Distance. Both conditions must be met before a trackpoint is added to the current track.
To change the Trackpoint Interval setting:
1.Highlight Trackpoint Interval on the Navigation main menu.
2.Use the LEFT or RIGHT
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small values will allow you to increase the track resolution.
Track Min Distance
(Advanced)
Track Min Distance allows you to set a minimum distance of travel before a trackpoint is added to the track.
NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions must be met before a trackpoint is added to the current track.
To change the Track Minimum Distance setting:
1.Make sure you are in Advanced User Mode, then highlight Track Min Distance on the Navigation main menu.
2.Use the LEFT or RIGHT
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small values will allow you to increase the track resolution.
50 | 51 |