Alarms Menu Tab
From any view, press the MENU key twice to access the Main
Menu System. The Alarms tab will be the default selection.
NOTE: When an alarm is triggered, you can silence it by pressing any key. The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected.
Alarms Menu
Depth Alarm
Depth Alarm sounds when the depth becomes equal to or less than the menu setting.
To change the Depth Alarm setting:
1.Highlight Depth Alarm on the Alarms main menu.
2.Use the LEFT or RIGHT
Fish ID Alarm
Fish ID Alarm sounds when the FishFinder detects fish that
correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+™ is on.
For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a
To change the Fish ID Alarm setting:
1.Highlight Fish ID Alarm on the Alarms main menu.
2.Use the LEFT or RIGHT
All
Large/Medium
Large
Low Battery Alarm
Low Battery Alarm sounds when the input battery voltage is equal to or less than the menu setting. The battery alarm will only sound for the battery that is connected to the FishFinder. The Low Battery Alarm should be set to warn you when the battery voltage drops below the safety margin that you have determined. For instance, if you are running a trolling motor (battery operated), you would want to set the Low Battery Alarm to sound before the battery voltage drops too low for it to be used to start your main,
To change the Low Battery Alarm setting:
1.Highlight Low Battery Alarm on the Alarms main menu.
2.Use the LEFT or RIGHT
54 | 55 |
