1
14
Inserting and Ejecting a Card

Inserting a Card

1

Slide the card cover lock to the direction

indicated by the arrow.

The card cover is unlocked and the message “CARD
COVER OPEN” appears on the display. When this
message appears, the power is switched off.
2

Face the card the correct way and insert it into

the card slot as shown in the illustration.

•Insert the card keeping it straight.
•The card stops with a click when it is inserted all the
way.
•Inserting the card the wrong way or at an angle could
damage the contact area or cause the card to jam.
•If the card is not inserted all the way, data may not be
written to the card.
3

Close the card cover securely.

Card inserted fully into the slot

The recorder sounds beeps* and the message “PLEASE
WAIT” on the display flashes for a short time.

Card not inserted fully into the slot

When the card cover is closed, the message “INSERT
CARD” on the display flashes for a short time. With the
recorder in this condition, pressing any button sounds
beeps* and flashes the message “INSERT CARD” again.
* When the system sounds are enabled.
................................................................................................
Notes
•If an unformatted card is inserted, the recorder automatically
displays the menu to format the card (☞ P.51).
•Never use any card other than one that has been formatted on this
unit or on a CAMEDIA series Olympus digital camera (☞ P.51).
1
2
3
Inserting and Ejecting a Card