DeviceNet Network Scanner DVPDNET-SL
4.1.4 Input Table and Output Table Select the device in “Scan list” and then the data length of input and output of the device will be displayed
respectively in the lower part of the following dialog box.
Parameter Explanation
PLC MPU’s registers and the corresponding output data are shown in “Output list”.
The values in PLC’s registers will be sent to slave in real time as the control data
of slave.
Output
Table
PLC MPU’s registers and the corresponding input data are shown in “input list”.
The data that slave sends to master will be updated in PLC’s registers in real time.
Input Table
The number of the register of PLC MPU; “D6289_H” indicates the high byte of
register D6289; “D6289_L” indicates the low byte of register D6289.
Register
Device
mapping
For displaying the data type and the name of current slave; “Poll” means the polled
data.
DVP-PLC Operation Manual 11