DeviceNet Network Scanner DVPDNET-SL
1.3 Specifications PLC that DVPDNET-SL supports
Item Specification
PLC Model DVPDNET-SL supports PLC MPU which can be extendable in its left side
g. DVP-SV, DVP-EH2_L, DVP-SX2, DVP-SA2, DVP10MC11T etc.）
DeviceNet Interface
Item Specification
Transmission
method CAN
Electrical
isolation 500V DC
Interface Removable connector (5.08mm)
Transmission
cable
TAP-CB01 cable and TAP-CB02 cable are recommended. (The shielded wire
must be grounded and the cable should be away from power line)
DeviceNet network provides direct current: 11~25V, 28mA（typical value）,
125mA impulse current（24 VDC）
Voltage
DeviceNet Communication
Item Specification
Explicit connection, IO polled connection, bit-strobe connection, COS/CC
connection
Message type
Baud rate
Standard mode: 125 kbps; 250 kbps; 500 kbps
Extended mode: 10 kbps; 20 kbps; 50 kbps; 125 kbps; 250 kbps; 500 kbps;
800kbps; 1M kbps
Environment
Item Specification
Noise immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV
Analog & Communication I/O: 1KV
Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
Operation 0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2
Storage -25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)
Vibration/shock
resistance
Standard: IEC 61131-2、IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27
(TEST Ea)
Certificates IEC 61131-2, UL508
DVP-PLC Operation Manual
2