3Com 09-0704-001 manual NetWare Directory example

2.2. Installation 2-3

(NetWare Directory example)

set Time Zone = PST8PDT

set Daylight Savings Time Offset = 1:00:00

set Start Of Daylight Savings Time = (APRIL SUNDAY FIRST 2:00:00 AM) set End Of Daylight Savings Time = (OCTOBER SUNDAY LAST 2:00:00 AM) set Default Time Server Type = SINGLE

set Bindery Context = O=b010 file server name SATURN

ipx internal net af0bfed9 load clib

load tcpip load conlog

load 3C5X9 slot=5 frame=ETHERNET_802.2 NAME=3C5X9_1 bind IPX to 3C5X9_1 net=AA440000

load 3c5x9 slot=5 frame=ETHERNET_II name=3c5x9_2 bind ipx to 3c5x9_2 net=cc100001

load 3C5X9 slot=5 frame=ETHERNET_802.3 NAME=3C5X9_3 bind IPX to 3C5X9_3 net=AA330000

load 3c5x9 slot=5 frame=ETHERNET_SNAP name=3c5x9_4 bind ipx to 3c5x9_4 net=AA550000

bind IP to 3c5x9_2 addr=192.147.72.3 mask=255.255.255.0

set maximum concurrent directory cache writes = 50 set maximum directory cache buffers = 4000

load cpqhlth load cdrom cpqsnmp mount all unload conlog load monitor

load dsapi

#######################################################################

#AccessBuilder NetWare Security Client Software

#######################################################################

load snds 3com

2For NetWare Directory Services, be sure the line load dsapi.nlm occurs before load snds.nlm (AccessBuilder Security Client).

3Add a UDP port for the Bindery/NDS Security Client into \etc\services with the service name "crsecacc", 888 is the default port number in the AccessBuilder server.

ex. add "crsecacc 888/udp" at the bottom of \etc\services as shown in the following example: