3

LOADING THE NETWORK

 

 

DRIVERS

This chapter describes how to load the network drivers required to let the 3C595-T4 PCI adapter operate with your network operating system. This information is arranged according to the following topics:

Summary of driver loading procedures

Using the EtherDisk diskette

Accessing DOS

Loading network drivers

Summary of Driver Loading Procedures

Table 3-1 summarizes the driver loading procedures based on the network operating system running on your computer.

Table 3-1 Summary of Driver Loading Procedures

Network Operating System

Driver Loading Procedure

 

 

Windows 95

Windows 95 will detect the presence of the T4 adapter

 

and request a driver for it. Refer to the section “Using

 

Windows 95.”

NetWare ODI:

AutoLink auto installation software loads all NetWare client

client environment

software, including drivers, if a single adapter is being

 

installed in a NetWare DOS ODI client. Refer to the section

 

“One Adapter in a Client” under “Using NetWare ODI.”

NetWare ODI:

Load the appropriate server drivers from the EtherDisk

server environment

diskette. Refer to the section “One or More Adapters in a

(versions 3.1X, 4.0X, 4.X)

Server” under “Using NetWare ODI.”

DEC® PATHWORKS®

Load the appropriate NDIS driver from the EtherDisk

Banyan® VINES®

diskette. Refer to the section “Loading NDIS Drivers.”

IBM® LAN Server

 

Microsoft® LAN Manager

 

Artisoft® LANtastic®

 

Windows NT 3.5x

Follow the instructions in the README.TXT file on the

Windows for Workgroups

EtherDisk diskette. If updating a driver, refer to the

 

section “Updating NDIS Drivers.”

 

 

Page 21
Image 21
3Com 10/100BASE-T4 PCI manual Loading the Network, Drivers, Summary of Driver Loading Procedures