Using NetWare ODI

3-7

5Read the screen and press [Enter].

6When the main menu screen shown in Figure 3-2 appears, select NetWare DOS ODI Client, and press [Enter].

EtherDisk-3C59X Fast EtherLink/EtherLink III Bus Master Adapter Family v.4.2

ESC=Cancel

3Com's auto installation software (AutoLink) automatically configures your￿ adapter and workstation for use as a NetWare client. To use AutoLink:￿

￿

*Have only one 3Com Etherlink III PCI adapter installed￿

*Use NetWare v2.X, v3.1X, or v4.X as your network operating system￿

*Have DOS on the client being installed￿

￿

AutoLink edits your AUTOEXEC.BAT and CONFIG.SYS files and saves the old￿ versions. Select General Information/Release Notes in the main menu for￿ information on AutoLink server support. To manually set up your adapter￿ or for information/drivers for other NOSs, use the options under Standard￿

Installation and Configuration in the main menu. This option will install a complete DOS ODI client.

(C) Copyright 1995, 3Com Corporation. All Rights Reserved

[ENTER]=Continue￿ [ESC]=Exit Program

Figure 3-1 AutoLink Information Screen

EtherDisk-3C59X Fast EtherLink/EtherLink III Bus Master Adapter Family v.4.2

ESC=Cancel

F1=Help

M A I N

M E N U

Auto Installation with Configuration (AutoLink)￿

NetWare DOS ODI Client￿

￿

Standard Installation and Configuration￿ Network Drivers ...￿ Configuration/Diagnostic/Troubleshooting ...￿ General Information/Release Notes

This option will install a complete DOS ODI client.

(C) Copyright 1995, 3Com Corporation. All Rights Reserved

[ENTER]=Execute Function￿ [−↓]=Scroll￿

[F1]=Help [ESC]=<Cancel>

Figure 3-2 Main Menu

Page 27
Image 27
3Com 10/100BASE-T4 PCI manual Read the screen and press Enter, ESC=Cancel