3600 SERIES USER MANUAL
2.3.5 Recall parameters
In the last paragraph, we know that we can store 10 sets of parameters. Also you can recall any one of them. It means that you needn’t to set up again for the usually requirements and it brings you much conveninent. Users can recall one set of the data from the stored data sets. Which including set up of 1)Voltage value; 2)Current value; 3)Maximum voltage; 4)Locked/ unlocked keypad; 5)Maximum power; 6)Baudrate; 7)Communication address.
The recall operation is as follows:
| Procedure | The operation Methods | LCD display |
| Step 1 | Press “Recall” button | CALL 1 |
|
|
|
|
| Step 2 | Enter the password ( Or jump to step 4 if the keyboard | ENTER PASSWORD |
|
| is unlocked) |
|
| Step 3 | Press “Enter” button ( it will return to step 2 if your | ENTER PASSWORD |
|
| password is wrong for reentering) | 1234 |
| Step 4 | Enter the number of the set data which you want to recall | CALL 1 |
|
| (from 1 to 10) by using the number key or rotate the |
|
|
| rotary knob to change the number |
|
| Step 5 | Press “Recall” button to confirm , if the number is out of | CALL * |
|
| the range from 1 to 10, it will retune to Step 2 for reenter |
|
|
|
|
|
It will exit the Recall operation at any procedure by press ESC button
2.3.6 The function of the Menu
3600 series power supply provides a Menu operation for some special functions. The opera-
tion and functions are as follows:
3600 Series Programmable Power Supply
12 | VERSION 2.0 2004.6 |
|
