![](/images/new-backgrounds/1119706/11970641x1.webp)
3600 SERIES USER MANUAL
Chapter 4 The introduction of main functions
4.1 The Definition of the Power Supply
Select the function item and then the interface as shown in Fig.
Fig 4-1 The Power Definition Interface
Add: Select “Add” in the function items and input the contents of each item. After the set of the input, select “Save” to save it.
Delete: Select the POWER record to be deleted in the table and then select “Delete”. Finally select “Save” and it will be OK.
Modify: Select the POWER record to be modified in the table and then select “Modify” to modify it. After the modification, select “Save” and it will be OK.
Query: Select “Query” and then wait for the name of the power supply to be queried.
Show: Select “Show” and it will show all the records.
Print: Select “Print” and it will print all the current records.
Parameter Explanation
Parametrer | Explanation | Range | Remarks |
Power Name | Name Of the Power Supply | Must be Input |
|
Current Up | The Max Current | 0~5A/ 0~3A0~1.5A | Must be Input |
|
|
|
|
Power Up | The Max Power | 0~90W/0~108W/0~108W | Must be Input |
|
|
|
|
Voltage Configure | The Max Voltage | 0~18V/0~36V/0~72V | Must be Input |
|
|
|
|
Configure |
|
|
|
ID | The ID Number |
| No Consideration |
|
|
|
|
Notes: When selecting the “Add” function item to add POWER, the name and address of the POWER cannot be repeated. After selecting the inputs, click “OK” and the dialogue frame as shown in Fig.
3600 Series Programmable Power Supply
VERSION 2.0 2004.6 | 19 |
|