
3600 SERIES USER MANUAL
4.6 Select PC to POWER Control Instructions
1.) Methods 1
As in Fig.
CLOSE POWER : Close the power output | OPEN POWER : Open the power output |
PC CONTROL : ontrolled by PC | POWER SELF : Control by power supply |
Fig 4-10-1 Select the Control Instruction
Explanation: The system default control instruction is the PC CONTROL state. And when the system is closed or the POWER is switched, the system will be automatically set to POWER SELF state.
2.) Methods 2
POWER ON/OFF Set | POWER Control Set |
Fig 4-10-2 Selecting Control Instruction
4.7 Set the Voltage Range
There are two methods to set the voltage range: one is by using the rotary button and the other is by using the keypad (0.004~36.000). If you want to set accurately, please use the keypad.
Fig 4-11 Using the Rotary knobFig 4-12 Using the Keypad
1) Using the rotary knob: Move the mouse to the icon and then rotate the knob.
2)Using the keypad: Select the “V” button, enter the data and then select the “ENTER” button.
4.8Set the Max Current
There are two methods to set the voltage range: one is by using the rotary knob and the other is by using the keypad. If you want to set accurately, please use the keypad. In general, you can use the rotary knob.
3600 Series Programmable Power Supply
22 | VERSION 2.0 2004.6 |
|