24COREBUILDER 6000 INTELLIGENT SWITCHING SOFTWARE REVISION 8.2.0
■You cannot modify the port specification of an IP interface defined on the LMM+ module. To modify the port specification, remove the IP interface and define it again.
■When you install software using the SNMP lpsFt MIB, the installation fails unless you specify a user password.
■When you install software from an unreachable device using the SNMP lpsFt MIB, the system reports the incorrect status “statusFileNotFound”, rather than the correct status “statusRemoteUnreachable”.
■When you install software using the SNMP lpsFt MIB and you specify an invalid username and password pair, the system reports the incorrect status ”statusFileNotFound”, rather than the correct status “statusUserAuthFailed”.