3Com 6000 manual Bridge MIB Support for the FESM, FESM support has been added to the Bridge MIB

What’s New at Revision 8.2.0? 15

2Enter the number(s) of the slot(s) that contain ports you want to set to IFM mode:

10-12

For each slot you entered, the system prompts you for specific port numbers:

Select Ethernet port(s) (1-8,all):

3Enter the number(s) of the port(s) that you want to configure:

1,2,5-7

You receive the prompt to enable or disable IFM mode for each selected port:

Enter new value (disabled, enabled) [disabled]:

4Enter enabled to set the port to IFM mode or disabled to deactivate IFM for the port.

Default The port’s current setting is indicated within square brackets. To select this default, press [Return]. This action leaves the port unchanged.

5Repeat step 4 to configure all the selected ports in all the selected slots.

Bridge MIB Support for the FESM

FESM support has been added to the Bridge MIB.

Filter MIB Support

Support for the Filter MIB (address group, port group, and bridge packet filter program) has been added.

FTP Packet Filter Program Transfers via SNMP

You can now use File Transfer Protocol (FTP) to transfer a user-defined packet filter program from a remote server to a CoreBuilder 6000 switching module through the SNMP lpsFtTable MIB.