3Com 7000 d, , configuration in the units memory., at the command prompt to permanently store this , Enter , port has also been configured, data will be passed across the link., The WAN port is now configured and, provided the remote units WAN , Press [CTRL]+[E] to submit this configuration., f, link. In most cases the defaults can be used., If necessary, change any of the other parameters to suit your WAN , e, If you are bridging, leave this field at the default setting., more information about using numbered and unnumbered links., guide for , AccessBuilder ISDN Access Router Software Reference, See the , or to a valid IP address for the WAN link. , If you are routing, edit the Port IP address to set it to

2-12 C
H A P T E R
2: I
N S T A L L A T I O N A N D
O
P E R A T I O N
d If you are routing, edit the Port IP address to set it to UNNUMBERED
or to a valid IP address for the WAN link.
See the AccessBuilder ISDN Access Router Software Reference guide for
more information about using numbered and unnumbered links.
If you are bridging, leave this field at the default setting.
e
If necessary, change any of the other parameters to suit your WAN
link. In most cases the defaults can be used.
f Press [CTRL]+[E] to submit this configuration.
The WAN port is now configured and, provided the remote unit’s WAN
port has also been configured, data will be passed across the link.
Enter SAVE at the command prompt to permanently store this
configuration in the unit’s memory.