3Com 78-11069-01 manual Configuring Octel MWI Ports

Chapter 3 Preparing the Cisco CallManager and Octel Systems

Configuring Cisco CallManager

Figure 3-1 Line Configuration for Voice Mail Ports

Configuring Octel MWI Ports

The DPA 7630 uses the Octel MWI ports to handle MWI messages from the Octel system. You can also enable these lines to support outgoing call processing. However, you must not configure these ports to handle any incoming call processing. See Figure 3-2 for an example of the following settings:

•Directory Number—Assign a directory number to each of these phones. Ensure that these directory numbers are not included in the voice mail hunt group. For this example, use 1301.

•Call waiting—We recommend that you disable call waiting on these phones.

•Call forwarding—Do not set.

	Cisco Digital PBX Adapter 7630 Administration Guide
78-11069-01		3-7