3Com 78-11069-01 manual Configuring the Virtual Port, 2 Line Configuration for Octel MWI Ports

Chapter 3 Preparing the Cisco CallManager and Octel Systems

Configuring Cisco CallManager

Figure 3-2 Line Configuration for Octel MWI Ports

Configuring the Virtual Port

The DPA 7630 automatically creates and uses the virtual port to send MWI messages to Cisco CallManager. One virtual port is created regardless of the number of Octel MWI ports you have. The virtual phone settings are similar to the Octel MWI port. See Figure 3-2 for an example of the following settings:

•Directory Number—Assign a directory number to this phone.

•Call waiting—We recommend that you disable call waiting on these phones.

•Call forwarding—Do not set.

	Cisco Digital PBX Adapter 7630 Administration Guide
3-8	78-11069-01