AutoLink Requirements | 3Com Fast EtherLink XL PCI 10/100BASE-TX

NetWare for Windows 3.1x, Windows for Workgroups, and DOS

3-9

NetWare for Windows 3.1x, Windows for Workgroups, and DOS

The AutoLink program installs DOS client software and drivers for Novell NetWare in Windows 3.1x, Windows for Workgroups 3.11, and DOS environments.

CAUTION: Do not use the AutoLink program if you are running Windows 95 or Windows NT.

The AutoLink program modiﬁes the CONFIG.SYS and AUTOEXEC.BAT ﬁles. It logs on to the server and updates the client software if your MIS department has already conﬁgured a 3Install account on your server.

AutoLink Requirements

To use the AutoLink program, your computer should have only one 3C905B-TX NIC installed and have 1 MB of free hard disk space.

Running the AutoLink Program

1Install the NIC and connect it to the network, as described in Chapter 2.

2Reboot, using a DOS diskette.

3Insert EtherDisk Diskette #1 in drive A.

4Run the Install program. Enter: a:install

This opens the main menu.

5From the main menu, select Auto Install and Conﬁg for NetWare (AutoLink) and press Enter.

6Select DOS, Windows 3.1x, or Windows for Workgroups 3.11 and follow the instructions.

7When the auto installation process is ﬁnished, remove EtherDisk Diskette #1 and reboot the PC.

If you are running Windows 3.1x, after you connect to the NetWare server, run the WSINSTALL program for full Windows support. Contact your MIS department for the location of this NetWare utility.

Image 29

3Com Fast EtherLink XL PCI 10/100BASE-TX NetWare for Windows 3.1x, Windows for Workgroups, and DOS, AutoLink Requirements

Contents

PCI 10/100BASE-TX 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Troubleshooting Specifications Page Figures Tables Lifetime Limited Warranty Australia, New Zealand Sweden, Finland, Norway Asia JapanDenmark Belgium, Netherlands, Luxembourg United Kingdom, Eire If you are looking for Turn to About this GuideFinding Speciﬁc Information in This Guide Convention Description ConventionsIcon Description 13C905B-TX NIC Introduction Industry-Leading Performance DynamicAccess Software Remote Wake-up Installation and Conﬁguration10/100 Mbps Support PC and Server Requirements 3C905B-TX NIC How Do I Install the 3C905B-TX NIC? Installing the NIC 1Inserting the NIC Secure the NIC with the screw you removed earlier 2Connecting the Network Cable to the RJ-45 Port Connecting to the Network Reconnect all cables and replace the PC cover Connecting the Remote Wake-up Cable Windows Installing If Windows prompts you to reboot, click No Network components should now include Click OK Conﬁrming InstallationClick Yes Click the Device Manager tab Updating the Network Driver Windows NTWindows NT Version Installing the Network Driver Click Update Click Cancel Network Settings window, click Close Click Continue NetWare for Windows 3.1x, Windows for Workgroups, and DOS Run the Install program. Enter ainstallAutoLink Requirements Running the AutoLink Program NetWare Version Installing the Novell NetWare Server Driver At the A\ prompt, enter nwserver Press Enter to continue the server installationMultiple NICs Network Text File Name Network Driver Name Operating System Supported Network Drivers Status LEDs Troubleshooting Description Flashing Steady Off 3Com NIC Diagnostics Program Select 3Com NIC Utilities Select 3Com NIC Diagnostics Help Accessing the 3C905B-TX Help System Running the NIC Self-Test Select 3Com NIC Utilities Select 3Com NIC Diagnostics Eeprom Fifo On both PCs Running the Echo Test 43Com NIC Diagnostics Program Support Screen 3Com Support Services Generating a Problem Report 5Problem Report Main Screen To exit the program, click Cancel Checking the Remote Wake-up Function Removing the 3C905B-TX NIC Pace and 3NICDIAGS SoftwareWindows 95 and Windows NT Windows Control Panel, select Add/Remove Programs Remove the PC cover and check the Remote Wake-Up connection 3Com DOS Diagnostic ProgramVerify the driver version Connect a straight-through cable from the PC to the hub Crossover Cable Troubleshooting Tips Troubleshooting Hubs with Crossover Cable Question Answer Frequently Asked Questions Add/Remove Programs Question Answer QuestionAnswer What is a Magic Packet? Accessing the 3Com World Wide Web Page Option Default Setting Available Settings Changing ConfigurationConﬁguration Settings Click NIC Details to display the NIC Details screen Displaying Conﬁguration SettingsChanging Conﬁguration Settings Changing Conﬁguration Settings Selecting Pace Applications Changing Pace Conﬁguration Select the protocol that the application uses Changing Pace Ranges and Protocols Pace Advanced Options Using the DOS Conﬁguration ProgramSetting Fast IP Speciﬁcations Specifications Figure A-1RJ-45 Connector Pin Assignments RJ-45 Connector Pin Assignments World Wide Web Site Online Technical Services3Com Bulletin Board Service Access by Analog Modem 3ComFacts Automated Fax ServiceAccess by Digital Modem 408 654 Support from Your Network Supplier 3ComForum on CompuServe Online ServiceLog on to your CompuServe account Type Press Return to see the 3ComForum main menu Support from 3Com 3Com Iberia Regional Sales Office Telephone Number 3Com GmbH3Com Latin America 3Com Mediterraneo Country Telephone Number Fax Number Returning Products for Repair Glossary DynamicAccess softwareDRMON Full scatter gather Network interface card NIC Inﬁnite bursting10/100 auto-negotiation NWay Pace technology Numbers Index NIC Index Page 3Com Corporation Limited Warranty FCC Class B Statement FCC Declaration of Conformity Page