4-SPECIFICATIONS
4.1Power Requirements 115V, 60 Hz, 2.8 Amp
5.2bar gauge pressure [75 PSIG], 28 litre/min @ 21°C, 1.01 bar [1.0 SCFM] at random cycle rate.
4.2Operating Rate:
Belt speed is 0.37m/s [72 F.P.M.]
Actual production rate is dependent on operator's dexterity. Boxes must be 18 inches (457mm) apart minimum.
4.3Operating Conditions
Use in dry, relatively clean environments at 4.4 C to 48.9o C [40o F to 120o F] with clean, dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture condensation on components.
WARNING
•To reduce the risk associated with fire and explosion hazards:
−Do not operate this equipment in potentially flammable or explosive environments.
4.4Box Board
125 to 275 P.S.I. bursting test, single wall B, or C flute.
4.5Box Weight and Size Capacities
A.Box weight, filled – weight must be sufficient to actuate center cam located between powered conveyor rollers, 2 kg [4 lbs] minimum, 29 kg [65 lbs] maximum.
B . Box Size: | Minimum | Maximum | ||
Length | 150mm [6.0 inch] | 635mm [25 inch] | ||
Width | 120mm | [4.75 inch] | 495mm | [19.50 inch] |
Height | 120mm | [4 .75 inch] | 510mm | [20 inch] |
Special modifications may be available for carton sizes not listed above.
Contact your 3M Representative for information.
13 | 2011 June |
