8-MAINTENANCE AND REPAIRS
8.1 Safety Measures (See section 3)
Carrying out maintenance and repairs may imply the necessity to work in dangerous situations.
8.2Tools and Spare Parts Supplied with the Machine
See Spare Parts Order Section.
WARNING
•To reduce the risk associated with mechanical and electrical hazards:
−Read, understand, and follow all safety and operating instructions before operating or servicing the Infeed Conveyor.
−Allow only properly trained and qualified personnel to operate and service this equipment.
•To reduce the risk associated with pinches, entanglement and hazardous voltage:
−Turn electrical and air supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads.
8.3Recommended Frequency of Inspection and Maintenance Operations
Operation | Frequency | Qualification |
Inspection safety features | daily | 1 |
Cleaning of machine | weekly | 1 |
Lubrication | monthly | 2 |
Drive belt replacement | when worn | 2 |
8.4 Inspections to be Performed Before and | 8.5 Check Efficiency of Safety Features | |
After Every Maintenance Operation |
|
|
Before every maintenance operation turn the rotary | 1. | Turn rotary switch STOP/OFF on main power |
switch to OFF on the main power and disconnect the | 2. | Drive Belt safety guards |
plug from the control panel. During the maintenance | (Note: | |
operation only the operator responsible for this duty | ||
must work on the machine. At the end of every |
| Production Line) |
maintenance operation check the safety devices. |
|
|
22 | 2011 June |
