This safety alert symbol identifies important messages in this manual.
READ AND UNDERSTAND THEM BEFORE INSTALLING OR OPERATING THIS EQUIPMENT.
Important – In the event the following safety labels are damaged or destroyed, they must be replaced to ensure operator safety. A label kit, part number 78-8113-6714-9 is available as a stock item or individual labels can be ordered. See Parts Illustration/List, Section I, pages 56 and 57.
The "Warning – Sharp Knife" label, shown in Figure 1-1, is attached to both sides of the upper ski assembly at the location of the cut-off knife on the upper taping head. The labels warn operators and service personnel of the very sharp knife used to cut the tape at the end of the tape application.
Figure 1-1 – Knife Warning Label
The "Warning – Hazardous Voltage" label, shown in Figure 1-2, is attached to the electrical enclosure on the lower left side of the machine frame. The label warns service personnel to unplug the power supply before attempting any service work on the case sealer.
Figure 1-2 – Electrical Warning Label
The "Caution – Pinch Point" label, shown in Figure 1-3, is attached to the center plate at the exit end of the machine bed. The label warns the operator to keep hands out of this area when the drive belts are running.
Figure 1-3 – Pinch Point Caution Label
