7
1. Power Requirements:
Electrical – 115 VAC, 60 Hz, 3.8 A (440 watts)
Pneumatic – 6.5 bar gauge pressure [95 PSIG]
110 litre/min @ 21° C, 1.01 bar
[3.75 SCFM] at 15 boxes per
minute
The machine is equipped with two 1/6 HP
gearmotors and comes with a 2.4 meter [8 ft]
long standard neoprene covered power cord
and a grounded plug. Contact your 3M
Representative for power requirements not
listed above.
2. Operating Rate:
Up to 15 boxes per minute. Actual production
rate is dependent on box size, box size mix, and
operator dexterity.
Box drive belt speed is 24 m/m [78 FPM]
3. Operating Conditions:
Use in dry, relatively clean environments at 4° to
50° C [40° to 120° F] with clean, dry, boxes.
Note – Machine should not be washed down or
subjected to conditions causing moisture
condensation on components.
4. Tape:
ScotchTM brand pressure-sensitive film box
sealing tapes.
5. Tape Width:
36 mm [1.5 in] minimum to
48 mm [2.0 in] maximum
6. Tape Roll Diameter:
Up to 405 mm [16.0 in] maximum on a
76.2 mm [3.0 in] diameter core.
(Accommodates all system roll lengths of
ScotchTM brand film tapes.)
7. Tape Application Leg Length – Standard:
70 mm ± 6 mm [2.75 in ±.25 in]
Tape Application Leg Length – Optional:
(See "Special Set-Up Procedure", page 24)
50 mm ± 6 mm [2.00 in ±.25 in]
8. Box Board:
Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or
double wall B or C flute.
(Specifications continued on next page)
Specifications