8
(Specifications continued on next page)
1. Power Requirements:
Electrical – 115 VAC, 60 Hz, 3.8 A (440 watts)
Pneumatic – 5 bar gauge pressure [70 PSIG]
110 litre/min @ 21° C, 1.01 bar [3.75 SCFM] at 15 boxes per minute
A pressure regulator is included
The machine is equipped with two 1/6 HP gearmotors and comes with an 2.4 m [eight foot] standard neoprene
covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed
above.
2. Operating Rate:
Up to 15 boxes per minute. Actual production rate is dependent on box size, box size mix, and operator
dexterity.
Box drive belt speed approximately 0.4 m/s [78 FPM]
3. Operating Conditions:
Use in dry, relatively clean environments at 4° to 50° C [40° to 120° F] with clean, dry, boxes.
Note: Machine should not be washed down or subjected to conditions causing moisture condensation on
components.
Specifications4. Tape:
Scotch® pressure-sensitive film box sealing tapes.
5. Tape Width:
50 mm or 2 inch minimum to 75 mm [3 inch] maximum
6. Tape Roll Diameter:
Up to 405 mm [16 inch] maximum on a 76.2 mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch® film tapes.)
7. Tape Application Leg Length – Standard:
70 mm ± 6 mm [2 3/4 inch ±1/4 inch]
Tape Application Leg Length – Optional:
(See "Special Set-Up Procedure")
50 mm ± 6 mm [2 inch ±1/4 inch]
•To reduce the risk associated with fire and
explosion hazards:
−Do not operate this equipment in potentially
flammable/explosive environments
WARNING