Adjustments (Continued)
WARNING
•To reduce the risk associated with mechanical and electrical hazards:
–Turn electrical and air supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads
Gate Pressure Regulator
Figure
The gate air pressure is controlled by a regulator mounted under the machine frame. This provides adjustment of the gate lifting force. When light weight boxes are being run the gate pressure can be reduced to minimize lifting of the box.
Gate Stroke Setting
Figure
The machine is initially set at the maximum gate lift of 25 mm [1 inch]. However this can be reduced if needed for special situations. To do this, remove the center roller section and turn the stop nuts clockwise until the desired lift is achieved.
Figure 5-3 – Gate Pressure Regulator
Figure 5-4 – Gate Stroke Setting
32