WARNING
•To reduce the risk associated with mechanical and electrical hazards:
–Turn electrical and air supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads
Gate Operation
Figure
A– Permanent gate cam
B– Removable gate cam
C– Kicker cam
The 800af is shipped with both gate cams A and B installed. With both cams the entire range of box lengths can be run
Drive Belt Tension
Belt tension must be adequate to positively move boxes through the machine and belts should run fully on the surface of the pulleys at each end of the frame. The idler pulleys on the infeed end are positioned by tension adjustment screws. To adjust tension, see "Maintenance – Drive Belt Replacement/Tension Adjustment".
Figure 5-1 – Gate Cams
Taping Head Adjustments – Refer to Section II
TAPE WEB ALIGNMENT – Section II
TAPE DRUM FRICTION BRAKE – Section II
APPLYING MECHANISM SPRING – Section II
30