Manuals / 3M / Kitchen Appliance / Food Saver

3M 800af-s manual Operation Continued, Figure, Box Sealing, 13– Box Size Set-Up

Models: 800af-s

1 98

Download 98 pages 20.27 Kb

Page 32

Box Sealing

Operation (Continued)

Figure 3-13

If the box is hard to move under the top head or is crushed, raise the top head slightly.

If the box movement is jerky or stops under the top head, move the side drive belts in slightly to add more pressure between the box and drive belts.

Note: Upper head has unique feature for overstuffed boxes. The head will raise up to

13 mm [1/2 inch] to compensate for this type of condition.

IMPORTANT – If drive belts are allowed to slip on box, excessive belt wear will occur.

Box Sealing

Figure 3-13 – Box Size Set-Up

WARNING

•To reduce the risk associated with pinch, entanglement, and impact hazards:

–Never attempt to work on any part of the machine, load tape, or remove jammed boxes from the machine while the machine is running

–Keep hands, hair, loose clothing, and jewelry away from moving belts and taping heads

1.Connect electrical and air supplies.

2.Turn main air valve "On" and adjust air regulator if pressure does not read 5 bar gauge pressure [70 PSIG].

3.Press electrical "On" button to start drive belts.

4.Continually feed boxes to case sealer, case sealer will automatically space entrance of boxes to machine.

5.Turn electrical and air supplies "Off" when machine is not in use.

6.Reload and thread tape as necessary.

7.Be sure machine is cleaned and lubricated according to recommendations in "Maintenance" section of this manual.

Note - Box drive motors are designed to run at a moderate temperature of 40° C [104° F]. In some cases they may feel hot to the touch. Adjustment of the machine or taping heads are described in the "Adjustment" section of this manual.

24

Image 32

3M 800af-s manual Operation Continued, Figure, Box Sealing, 13– Box Size Set-Up

Contents

Stainless Steel Adjustable Case Sealer with Instructions and Parts ListImportant Safety Information 3M-MaticPage Replacement Parts and Service Information Replacement Parts and Additional ManualsTo Our Customers Technical AssistancePage Replacement Parts And Service Information SERVICE,REPLACEMENTPARTSANDADDITIONALMANUALSTo Our Customers AVAILABLE DIRECT FROMPage Page Table of ContentsInstruction Manual Section I – AccuGlide SST 2 Inch Taping Heads Table of Contents ContinuedPage Intended Use 1Tool/Spare Parts Kit Important Safeguards Explanation of Signal Word Consequences•To reduce the risk associated with muscle strain •To reduce the risk associated with pinch hazardsImportant Safeguards Continued Figure 1-1– Replacement Labels/3M Part NumbersPage Important Safeguards Continued Operator Skill Level DescriptionsSkill 1 - Machine Operator Operation2.Operating Rate Specifications1.Power Requirements Specifications Continued 3.Operating Conditions4.Tape 5.Tape WidthSpecifications Continued 9.Box Weight and Size CapacitiesBOX LENGTH IN DIRECTION OF SEAL MUST BE GREATER THANSpecifications Continued Dimensions are listed on the following page10.Machine Dimensions MinimumMaximum MinimumInstallation and Set-Up Receiving And HandlingMachine Set-Up •To reduce the risk associated with muscle strainFigure 2-2– Lower Tape Drum Bracket Position Installation and Set-Up ContinuedFigure 2-1– Installation and Set-Up Figure 2-3– Conveyor Systems Installation and Set-Up ContinuedFigure 2-4– Conveyor Bed Height Adjustment Figure 2-5– Pneumatic Connection Installation and Set-Up ContinuedInitial Start-Upof Case Sealer Operation Operation Continued Figure 3-2– Controls, Valves and Switches1Electrical On/Off Switch 3Emergency Stop Switch 4Height Adjustment Crank, Upper Taping Head5Width Adjustment Crank 7Indicator, Air PressureOperation Continued Tape Loading/Threading – Upper Taping HeadTape Loading/Threading – Lower Taping Head With Tape Drum On Taping HeadOperation Continued Box Size Set-Up FigureMove the compression rolls as wide as possible Figure 3-6– Box Size Set-UpOperation Continued FigureFigure Figure 3-7– Box Size Set-UpOperation Continued FigureFigure •To reduce the risk associated with pinch hazardsOperation Continued FigureFigure Figure 3-11– Box Size Set-UpOperation Continued FigureBox Sealing Figure 3-13– Box Size Set-Up7.Turn machine On only when it is safe to do so Operation ContinuedBox Jams •To reduce the risk associated with muscle strainMaintenance CleaningLubrication Figure 4-1– Lubrication Points, FrameMaintenance Continued Drive Belt Replacement/Tension AdjustmentFigure 4-2– Drive Belt Replacement Figure FigureMaintenance Continued 11.Assembly is reverse of disassemblyMaintenance Continued Knife Replacement, Taping HeadAir Line Filter – Figure Circuit BreakerTaping Head Adjustments – Refer to Section Gate OperationDrive Belt Tension Figure 5-1– Gate CamsFigure 5-2– Upper Taping Head Leveling Adjustments ContinuedUpper Taping Head Leveling Adjustments Continued Gate Stroke SettingFigure 5-4– Gate Stroke Setting Gate Pressure RegulatorTHIS PAGE IS BLANK Special Set-UpProcedure Figure 6-1– Drive Belt Height, DisassemblyFigure 6-2– Drive Belt Height, Reassembly Changing Drive Belt Height•To reduce the risk associated with muscle strain Special Set-UpProcedure ContinuedOuter Column Re-Positioning Refer to Figure Special Set-UpProcedure Continued Figure 6-4– Column Re-PositioningTroubleshooting Troubleshooting GuideProblem CauseTroubleshooting Continued Troubleshooting GuideProblem CausePneumatic Diagram Figure 7-1– Pneumatic DiagramElectrical Diagram Figure 7-2– Electrical DiagramPage THIS PAGE IS BLANK Spare and Miscellaneous Parts Spare PartsRef. No Part NumberPart Number Options/AccessoriesOption/Accessory Replacement Parts – Illustrations and Parts Lists Frame AssembliesTHIS PAGE IS BLANK 800af Adjustable Case Sealer Frame Assemblies 800af-sAdjustable Case Sealer Figure Figure Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure Figure Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure Description FigureRef. No. 3M Part No 800af-sAdjustable Case Sealer Figure Figure Ref. No. 3M Part NoDescription 10467-1800af-sAdjustable Case Sealer Figure 10473/1 of Figure 10473 Page 1 of Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure 10473/2 of Figure 10473 Page 2 of Ref. No3M Part No Description800af-sAdjustable Case Sealer FigureFigure Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure Figure CodeDescription 10469-1800af Adjustable Case Sealer Figure Figure CodeDescription 10470-1800af-sAdjustable Case Sealer Figure 10471/1 of Figure 10471 Page 1 of Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure 10471/2 of Figure 10471 Page 2 of Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure 10471/3 of Figure 10471 Page 3 of Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure 10471/4 of Figure 10471 Page 4 of Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure Figure Ref. No3M Part No Description800af-sAdjust able Case Sealer Figure 10472/1of Figure 10472 Page 1 of Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure 10472/2 of Figure 10472 Page 2 of Ref. No3M Part No Description800af-sAdjustable Case Sealer Figure Figure Ref. NoCode Description800af Adjustable Case Sealer Figure Figure 10475 Page 1 of Ref. No3M Part No DescriptionFigure 10475 Page 2 of Ref. No3M Part No DescriptionTHIS PAGE IS BLANK 800af-sAdjustable Case Sealer Figure Figure Ref. No3M Part No Description800af-sAdjustable Case Sealer FigureFigure Ref. No3M Part No DescriptionTHIS PAGE IS BLANK