46Technical Support
LED indicator: disable/enable
Technical Support
LED indicator: disable/enable
Some users may prefer to turn off the LED indicator.
To disable this feature, open DMS and select the Setup button. On the dosimeter tab, under Dose% indicator LED uncheck the following:
CHAPTER
6
Alarm Enable
Alarm enable: Will disable the flashing red LED when the threshold entered exceeds the designated value during run mode. (If checked, red LED will flash.)
Heartbeat enable: Will disable the flashing green LED the dosimeter is running. (If checked, a green LED will not flash.)
•NOTE: For more information, see section on Dosimeter Settings, page 25.
Page 46 | eg4 |
