Chapter 2 Setting Up Your M170 FPD Monitor

13

Figure 2. Removing the Base Cover

Tabs

Base Cover

65-2220

1.Make sure the monitor is in its full upright position.

2.Push in and lift up on each of the two tabs located on the left and right sides of the base cover. This action will release the base cover.

3.Slide the cover back towards you to remove.

Figure 3. Releasing the Cable Connector Cover

Cable Connector

Cover

Press in tabs

65-2219

4.Push in on the cable connector tabs as shown above to release from LCD back. Gently pull down to release tabs.

3M Touch Systems Proprietary Information