Chapter 2 Setting Up Your M170 FPD Monitor

21

4.Plug the AC/DC power supply into the M170 FPD. Be sure to use the power supply included with the monitor.

WARNING

To avoid the risk of electric shock which could result in serious injury or death:

•This device must be operated with the original power supply, part number: HJC, HASU05F.

CAUTION

To avoid the risk of electric shock which may result in minor or moderate injury:

•The socket-outlet should be installed near the equipment and should be easily accessible.

•Use a power cable that is properly grounded. Always use the appropriate AC cord certified for the individual country. Some examples are listed below:

USA UL Switzerland SEV Canada CSA

Britain BASE/BS

Germany

VDE

Japan

Electric Appliance Control Act

5.Connect the power cable to the AC/DC supply. Connect the other end to the appropriate AC outlet.

Figure 12. Connecting the M170 Cables to your Computer

65-2223

You should be sure all cable connections are secure -- tighten all cable screws. Shaking and vibration may dislodge cables that are improperly connected.

Route all wiring and cabling away from heat sources and sharp metal edges to avoid damage. Also, keep the touch screen cable away from sources of electromagnetic and radio frequency interference.

WARNING

To avoid the risk of electric shock which could result in serious injury or death:

•Do not use a damaged power supply.

•Do not use a power cord that is frayed or otherwise damaged.

3M Touch Systems Proprietary Information