Chapter 3 Video Display Options

27

Icon Description

AUTO CONFIG

If you change your display to Windows shut down mode, this adjustment will work better. Click on the "Start" button at the bottom right side, and then click Shut Down. This will bring you to the Windows shutdown mode. Then select Auto Adjust. The screen will adjust within 4 seconds.

AUTO ADJUST

Performs automatic configuration of the Phase, Clock, vertical, and horizontal position.

AUTO TRACKING

Tunes the clock and phase to the best condition automatically.

AUTO POSITION

Centers the image automatically. Both horizontal and vertical position is adjusted such that the image is centered on the panel.

AUTO COLOR

Adjusts the gain and offset of the Red, Green and Blue channels on the ADC automatically.

1:2 INPUT LEVEL

Selects the applicable input source analog input (D-sub), or digital input (DVI-D).

INFORMATION

Provides the user with detailed information regarding the current input format and version (including resolution, pixel clock, vertical /horizontal frequency, software version, and input source).

RECALL

Resets the control functions back to the original factory preset values. In order for the Recall function to work, the timing must fall under one of the factory preset timing modes.

SHARPNESS

Adjusts the video quality to be sharp or blurry (special for text mode).

COLOR TEMPERATURE

Adjusts color temperature to PRESET 1 (9300 color temperature) or PRESET 2 (6500 color temperature). Or, for a custom color mode, select USER and push the select button to activate the RGB submenu. This adjusts the intensity of the RGB video output. Using the select button activate the Red (Red Gain), Green (Green Gain) or Blue (Blue Gain) and change color strength for a customized color mode. By adjusting a single color, you can make the picture look warmer (biased towards red) or cooler (biased towards blue). Adjusting all three levels will make colors appear more or less striking.

OSD

Adjust the OSD image horizontally or vertically by pressing the Select button. H- position moves the OSD position left or right. V-position moves the OSD position up or down.

3M Touch Systems Proprietary Information