26

M170 FPD Monitor Installation Guide

If you do not press the Menu, Select, or ◄/left or ►/right adjust buttons for 45 seconds, the monitor adjustment program times out and hides the menu options. You can press the Menu button at any time to display the options again.

Pressing MENU will pull up the On Screen Display (OSD) menu, as shown below.

Figure 14. M170 Main Menu Options

Horizontal Vertical Clock

Phase

Exit/Save

Auto Config

 

Brightness

Input

 

Contrast

Information

OSD Color Sharpness Recall

Icon Description

H POSITION (Horizontal Position)

Moves image horizontally on screen either left (◄) or right (►).

V POSITION (Vertical position)

Moves images vertically on screen either up (▲) or down (▼).

PHASE

If the phase of your monitor is not fine-tuned, you may observe unstable horizontal noise lines and cross-talk stretching from the edge of small windows on your display.

If you do an Auto Tracking, the monitor will try to find the best Clock/Phase setting. If you are not satisfied with the auto adjustment, fine-tune the phase manually as described above

CLOCK

If the clock setting of your image is not fine-tuned, you may observe periodic vertical bars of video noise on your image. These bars of noise are usually adjusted out when an Auto Configuration is performed. If the bars of noise are still present, this setting can be adjusted manually.

Adjust this setting so that either the vertical bars of noise are replaced by an even amount of noise across the whole screen, or the noise disappears completely.

If you do an Auto Tracking, the monitor will try to find the best Clock/Phase setting. If you are not satisfied with the auto adjustment, fine-tune the clock manually as described above.

3M Touch Systems Proprietary Information