Section 5: Remote Control
5-1. How to Operate the Remote Control
The remote control keypad (Figure
nNote
Pressing some buttons will cause the remote control LED to flash. This is an indication that the current selection can be adjusted by pressing the 
or 
buttons.
Remote Control Buttons
Press to switch between RGB1 or RGB2 input sources. Press RGB +
RESET for
Press to switch between VIDEO1 or VIDEO2 input sources. Press
VIDEO + RESET to switch displayed menu language. (Eng., Fr., Sp.)
VOL | Press to display the Volume bar. Press | or | to adjust speaker |
|
|
|
volume or press RESET to return to default setting.
PHASE
BLANK
MUTE
MENU
SELECT
ZOOM
Press PHASE and the LED lamp will flash. Press 
or 
to
adjust screen flicker or press RESET to return to the factory default setting.
After pressing Volume, Phase, H/V or MENU press RESET to return these buttons to the factory default setting.
Press BLANK to display a black background with no image. Press again to return the image to the screen.
Press to switch the audio (speaker) sound ON (volume bar turns green) or OFF (volume bar turns red).
Press once for Memory 1, twice for Memory 2 or three times for
Memory 3. Press SELECT to display the picture adjustments
(brightness, contrast, 
or 
to adjust or press
RESET to go to the STANDARD default setting.
Press to select the picture adjustment setting. See MENU button.
Press to switch projector between projection and standby mode. In projection mode the lamp is ON. In standby mode the lamp is OFF.
Press ZOOM and the LED will begin to flash. Press | to increase | Figure |
|
|
or 
to decrease the size of the screen image.
FOCUS | Press to display the focus pattern. Press | to increase or | to |
|
|
|
decrease the sharpness of the screen image.
3M 1997 | 3M | | Multimedia Projector MP8650 | 15 |
|
|
